CMS range of DC damping compounds offers a selection of vibration damping materials.
Application of a CMS DC damping compound to metal or plastic
panels will inhibit the build up of resonant vibrations and will efficiently reduce the levels of radiated noise.
Applications
Surfaces must be clean and degreased. Any stainless steel or pre-painted
surfaces should be rubbed down with an emery cloth and galvanised steel
surfaces should be treated with a mordant solution. Aluminium should be
treated with an etching primer and for any other unpainted metal surface,
treatment with a quality matt primer will be adequate.
CMS DC 1010 is a spray applied compound using large bore equipment.
Coverage can be built up by successive coatings. Note, it is essential to allow full drying of coats between applications. Coverage is approximately
6 m² per 25 kg with a 3mm wet thickness depending on the surface profile.
Protection after application can be achieved by painting with most types of
paints after the compound is fully dry. Any excessive exposure to fluids such as water or oil etc will lead to a softening of an unprotected compound and
subsequent loss of acoustic properties and possible bonding failure.
Benefits
- Spray grade compound, ready for use.
- Water based, quick drying.
- User friendly polymeric emulsion.
For more information download datasheet.
Product Datasheet
